Indicators & New Arrivals

A-12 Indicator

• Introduction :

• Fast speed, high precision Σ - Δ A/D conversion.
• Anti-vibration software
• Applied in platform scale, floor scale, weighing system equipped with 1-4 load cell.

• Features :

• A/D conversion with readability 1/30000
• Use inner code to replace weight observing and analysis tolerance
• Software to strength anti-vibration ability
• Zero-tracking, Zero range setup (auto/manual)
• Setup digital filter intensity, range and stable time
• Counting function with unit data save protection in case of power off
• Optional function :
  • KG/LB switch function
  • Animal scale function (A12, A12S only)
  • Two fixed- value outputs function with TTL output

• Parameters :

Model	A12 / A12S	A12E / A12ES
Input signal range	-10mV~15mV
Input sensitivity	1V/e
Load cell Excitation	Dc 5V:/150mA
Max. load cell connection	4 at 350 ohm
Display	6 bits LCD, 6 status indications	6 bits LED, 6 status indication
Optional interface	RS232C serial communication
Transmission distance	RS232C30 meters

YHT-3 Indicator

• Introduction :

• tri-integral A/D conversion technology.
• Applied in weighing system equipped with 1-4 load cells.

• Features :

• A/D readability 1/30000
• Auto adjust speed and digital filter
• With power save mode
• Low battery protection
• Accumulation auto/manual
• optional function :
  • display 10 times enlargement
  • auto display locked
  • KG/LB switch function

• Parameters :

Model	T3
Input signal range	0mV~10mV
Input sensitivity	1V/e
Load cell Excitation	Dc 5V
Max. load cell connection	4 at 350 ohm
Display	6 bits LED, 6 status indications
Optional interface	RS232C serial communication
Transmission distance	RS232C30 meters

C601 Indicator

• Introduction :

• It has two version: one is batching version applied in fix-quantity scale,fix-value scale,electronic packing scale; the other is dispensing version applied in electronic dispensing system.

• Features :

• Strong anti-disturbance ability
• A/D conversion with readability 1/30000
• Use inner code to replace weight observing and analysis tolerance
• Setup zero-tracking range, zero(auto/manual) range
• Setup digital filter intensity,A/D conversion speed
• Setup parameter pre-act,tolerance,relict,delay time in batching version
• Select function over status dealing,dip charge in batching version
• Setup auto cycle fixed-quantity/times control in batching system
• Make vague intelligent correction for parameter pre-act in batching version
• Make control mode of plus/minus scale in batching version
• Make 1~2 materials batching control in batching version
• Setup parameter delay time¡¢grade node in catch weigher version
• Select out-control/self check mode in catch weigher version

• Parameters :

Model	C601
Input signal range	0mV~25mV
Input sensitivity	1V/e
Load cell Excitation	Dc 5V
Max. load cell connection	8 at 350 ohm
Display	11 bits LED, 13 status indications
Standard interface	RS232C serial communication Scoreboard at 20mA current loop Parallel printer 6 on/off inputs 7 on/off outputs
Optional interface	4-20mA analog output 7 relay outputs

T7E Indicator

• Introduction :

• Weighing Indicator XK3190-T7E adopts fast speed , high precision A/D conversion technology ,widely applied in electronic platform scale, electronic floor scale , and so on alike static weighing system equipped with 1-4 loadcell .

• Features :

• low power consumption, provided with different kinds of power saving mode.
• Optional for RS232 communication with selectable baud rate and scoreboard interface
• sending by 20mA current loop .
• Various kind of weighing mode , with easy operation
• AC/DC both available , could be recharged during power off .

• Standard Function :

• Peak hold function
• Animal weighing function
• Kg/lb switch function
• Pre-set tare weight function
• High-ok-low function
• Weight accumulate , accumulate display ,accumulate clear fuction
• ZERO trucking range , ZERO setting ( switch on / manually ) range , speed rate of zero
• setting could be set separately .
• Battery indication and alarm for low battery protection .

• Parameters :

• Input signal range -19mV-19mV
• Loadcell excitation: DC5V;
• Max. connection number of loadcell: 4 at 350ohm
• Loadcell connection mode : 6 wires
• Verfied counts 3000
• Display 6 digits LED,6status indications
• Display range -999999-999999
• Power supply : AC 220v : 50-60hz DC- In-built rechargeable battery